|
|
|
| X03 Low-Leak Model Damper |
|
When full "bubble-tight" performance is required...
|
|
What sets the X03 apart?
|
- Graphite filled PTFE bearings housed in a 100% FRP packing gland
- Viton shaft seals
- 100-mil corrosion barrier applied to all internal surfaces
- PTFE Encapsulated O-Ring seal
- Shaft is fully encapsulated between two two blade halves
- No blade stops or Seal laminated into the body increasing pressure drop
- PTFE is self-lubricating preventing wear to the seal or body
- Nesting the shaft between blade halves prevents twisting or separation of this blade from the shaft
|
| Benefits |
- No measurable leakage (Bubble-tight)
- Maximum corrosion resistance
- PTFE Seal is mchanically fastened in the blade
|
| Options |
- Shaft: Stainless, Hastelloy, Titanium
- Seals: PTFE
- Body: Custom flange sizes
- Operator: Worm Gear, Chain Wheel, Pneumatic or Electric operators
|
| X02 Low-Leak Model Damper |
|
When a small amount of leakage is acceptable...
|
|
What sets the X02 apart?
|
- Graphite filled PTFE bearings housed in a 100% FRP packing gland
- 100-mil corrosion barrier applied to all internal surfaces
- Standard 2 week lead time on Standard items
- Standard 4 week lead time on custom items
|
| Benefits |
- Leakage <3CFM at 15 in. W.G.
- Maximum corrosion resistance
- Can be customized to meet a specific need
|
| Options |
- Shaft: FRP, Stainless, Hastelloy, Titanium
- Seals: EPDM, Viton
- Body: Custom flange sizes, lengths, shapes
- Operator: Worm Gear, SS Locking hand lever, Chain Wheel, Pneumatic or Electric operators
|
| X01 Volume Control / Balancing Damper |
|
The economical option where isolation is not required...
|
|
What sets the X01 apart?
|
- Graphite filled PTFE bearings housed in a 100% FRP packing gland
- 100-mil corrosion barrier applied to all internal surfaces
- Standard 2 week lead time on Standard items
- Standard 4 week lead time on custom items
|
| Benefits |
- No seals
- Maximum corrosion resistance
- Can be customized to meet a specific need
|
| Options |
- Shaft: FRP, Stainless, Hastelloy, Titanium
- Seals: EPDM, Viton
- Body: Custom flange sizes, lengths, shapes
- Operator: Worm Gear, SS Locking hand lever, Chain Wheel, Pneumatic or Electric operators
|
Links require Adobe Reader to open. If you do not have Adobe Reader, you can get it by clicking the image below.
|
 |
|
|
|
